DDR3 memory performance Analysis on Intel X 79

 

Whereas, in that they were issued in 2007 dedicated DDR3 graphics memory Kit walked a long way. This week the introduction of the second generation of Intel Core i7 processors and platforms Socket LGAS LYING-2011 with the 79 X Express chipset, we have seen that memory DDR3 still has room for growth. Intel Sandy Bridge-E and X 79 express plates support quad-channel memory.

Our readers seem to be curious about the benefits of this new solution drams. Whereas, in that our deletion of the article published in the Intel Core i7-3960X we're constantly asking if Kit, dual-channel memory will work on this Board, and how memory performance in different clock e-mails. We didn't have time to test the memory in our deletion of the article, but we have completed the test today. We want to maximize performance in the new Core i7-3960X or 3930K Intel processors with quad-channel memory!

We will use Intel DX79SI motherboard with BIOS 280 for our testing again. This is a reference design for Intel X 79 Express chipset, so it should offer fixed memory stability and high performance.

It's very easy to overclock memory for desktop motherboard Intel DX79SI, as the seven multipliers dedicated DDR3 graphics memory, ranging from 800 MHz 2400MHz! So Overclocking memory lasts only a few minutes and a couple of clicks in the system BIOS.

Do you really think Intel DX79SI "Siler" plate through its paces, we need a good memory kit, and that we turned to a series of Dominator GTX, which is the Corsair's extreme performance line of PC memory. Dominator GTX reports are intended for people who are obsessive about beating speed records and sets are individually hand-screened to ensure that only the best modules selected.

Exact kit that we use is CMGTX8. It consists of four modules, 2 GB, which are evaluated 2400MHz with 10-12-10-30 the timing at 1.65 in. Corsair memory, this solution should do great with the motherboard Intel DX79SI as separators, which go up to 2400MHz, without the need to overclock the processor! We use this package see how memory performance is starting with a single channel, and the way to the surround channel. Then, what do we look at the memory clock on this set of quad-channel memory, begins at 1066 MHz and up to the highest possible path.

Let's look at the test system and then jump into several standards!